Wire Size Calculator by Voltage Drop
The smallest conductor whose voltage drop stays within your target, shown in both metric and AWG sizes.
How the size is chosen
For a target drop of p percent the minimum conductor area is A_min = k × ρ(T) × L × I ÷ (p/100 × V). The calculator then picks the smallest size in each series whose area is at least A_min. If you enter ratings from your own datasheet, the size must also meet the load current in your table, and the page tells you which of the two decided the size.
Worked example, 20 °C
12 V DC, 10 A, 5 m one way, 3% target (0.36 V). Minimum area 4.789 mm². Metric series: 6 mm² gives 0.287 V (2.39%). 4 mm² gives 3.59%, above the target. AWG series: 10 AWG (5.261 mm²) gives 2.73%; 12 AWG (3.309 mm²) gives 4.34%, above the target.
Why size is not only voltage drop
A conductor must also carry its current without overheating, and that limit comes from the cable’s datasheet or the rules where you work. This calculator contains no rating tables; if you add your own ratings above they are used as typed.
Questions
What does the optional ratings box do?
It lets you type ratings from your own datasheet. The calculator then picks the larger of the size needed for the drop target and the smallest size in your table with a rating at least equal to the design current, and shows which one decided. Nothing is stored.
Why do the metric and AWG results differ?
They are different nominal areas. The calculator shows the smallest size in each series that meets the target, and the actual drop at that size.
What if the result exceeds the largest size?
The page says so and shows how many parallel runs of the largest size would reach the target.
Sources and constants
- Copper Wire Tables, NBS Handbook / Circular No. 31 (1914), NIST archive
- ASTM B258, standard nominal diameters and cross-sectional areas of AWG sizes (the standard itself is paywalled and is not reproduced here)
- IEC 60228, conductors of insulated cables (the standard itself is paywalled and is not reproduced here)
Related
Get the app
Want the same numbers on your phone, offline and with your assumptions saved? Gaugewise is a free Android calculator with no ads and no account.
Design aid. Estimates from physics and the values you entered; not a code check. Final wire selection remains the installer's responsibility. Full disclaimer.