Disclaimer
The calculations are a design aid. They do not replace a design, the local electrical code or a qualified electrician. Results depend on the values you enter and on the assumptions listed with each result. Ampacity (current rating), correction factors and code requirements are entered and checked by you. Local rules may be stricter. Do not use the results as the sole basis for decisions that affect safety. Final wire selection remains the installer's responsibility.
What the calculations assume
- Resistance only: no reactance, no power factor, no skin or proximity effect, no harmonics.
- Ambient and grouping corrections apply only if you enter them, and only to ratings you enter.
- Copper and aluminum use reference resistivity at 20 °C with a linear temperature correction (see the constants); real cables differ.
- Parallel conductors are assumed identical in size and length and to share current equally.
- Split-phase calculations assume resistive loads and equal conductors.
- Drops in terminals, joints, fuses and breakers are not included.
- Short-circuit, ground, burial and protective-device sizing are not covered.
No affiliation
Gaugewise is not affiliated with any code body, cable manufacturer or government agency, and makes no claim of conformity with any code or standard.
Questions: andrew@andrewboyko.name. Method and versions: method, constants and changelog.